Flame F2
Every Flame Guitar is unique. I rarely use the same top-wood or combination of tonewoods. That is because every Flame guitar is tailored to meet the customer’s specific requirements.
But the guitar shown here is typical of the Flame F2 model. The specification for this particular guitar is listed below.
Prices start at £3750 including hard case
- Mahogany body with figured ash top
- Chambered body
- Maple, walnut and padauk neck
- Bloodwood fretboard
- Bound fretboard
- 25" scale length
- Compound radius fretboard-10 to 14"
- 24 frets
- Bolt-in neck to body construction
- Oil finish
- Gotoh 510 tuners
- ABM bridge
- Hosco compensated nut
- Two-way truss rod
- Stainless steel frets
- Bare Knuckle Nailbomb pickups
- Partial coil cut switching for each pickup
- Choice neck thickness and width *
- Choice of pickups
- Choice of tone woods
- Choice of fret wire widths and heights*
- Stainless steel or nickel fretwire
- Chrome, black or gold hardware
- Left hand*
- * No additional cost
- Mahogany body with figured ash top
- Chambered body
- Maple, walnut and padauk neck
- Bloodwood fretboard
- Bound fretboard
- 25" scale length
- Compound radius fretboard-10 to 14"
- 24 frets
- Bolt-in neck to body construction
- Oil finish
- Gotoh 510 tuners
- ABM bridge
- Hosco compensated nut
- Two-way truss rod
- Stainless steel frets
- Bare Knuckle Nailbomb pickups
- Partial coil cut switching for each pickup
- Choice neck thickness and width *
- Choice of pickups
- Choice of tone woods
- Choice of fret wire widths and heights*
- Stainless steel or nickel fretwire
- Chrome, black or gold hardware
- Left hand*
- * No additional cost